Komax ADS 112
With the ads 112 prefeed, fine, coarse and non-round wires from reels, conipacks or wire drums can be fed powerfully yet carefully into the processing machine.
The ads 112 wire feed system unwinds a wire reel precisely via two synchronously running toothed belts without damaging the wire. The ads 112 is a preferred solution, especially if the wire type to be processed has to be changed very often. A control arm controls the output. For wires with twist or high rigidity, the prefeeder can be upgraded with the optical wire sag control DHS 1000D as an option.
| Height of wire outlet min. | 1115 mm |
|---|---|
| Height of wire outlet max. | 1090 mm |
| Usable length of wire storage | 800 mm |
| Weight of wire roller max. | 100 kg |
| Wire diameter max. | 28 mm |
| Width of ribbon cable max. | 28 mm |
| Holding capacity (weight of wire reel) max. | 100 kg |
| Infeed speed max. | 2.7 m/s |
| Electrical connection | 1 x 230V, 50Hz, 16A, 560W |
| Total weight (prefeeder and linear storage unit) | 55 kg |
| Compressed-air connection | 4 bar |
| Compressed-air quality | non-oiled |
| Connecting the compressed-air supply | Plug connection 6 mm |
| Functional principle max. | Depends on the performance specifications of the wire processing machine and the maximum dereel speed of the wire ring |
| Dimensions without stand/length | 400 mm |
| Dimensions without stand/width | 650 mm |
| Dimensions without stand/height | 400 mm |
| Dimensions with stand/length | 550 mm |
| Dimensions with stand/width | 650 mm |
| Dimensions with stand/height | 1500 mm |
| Weight without stand | 55 kg |
| Weight with stand | 95 kg |